E2 Rigid Epoxy - Non Drip

Handling

• Number of components

  2

  i

• Mix ratio

  1:1

  i

• Application methods

  Brush, Machine, Cartridge, Roller

  i

Application instructions

(1) Prepare Surfaces: Clean surfaces to remove all dust, dirt, and grease. For highest bond strength, chemical cleaning is required (if possible, use acetone or isopropyl alcohol).

(2) Mix: Mix equal parts by volume of Part A (resin) and Part B (hardener) together. Mix thoroughly until uniform color throughout.

(3) Worklife: Worklife of mixed adhesive is approx. 5 minutes* @ 75˚F. Higher temperatures reduce worklife and accelerate curing. CAUTION: Mixing large quantities (more than a pint batch size) generates significant heat and shortens worklife.

(4) Apply: Use spatula, trowel, putty knife or specialized equipment and apply evenly to both surfaces to be joined for best adhesion and bond strength. Maximum shear strength is obtained with a 3-5 mil bond line. Join the surfaces together and secure until adhesive cures.

(5) Curing: Allow adhesive to cure @ 60˚F or higher and do not allow movement between the surfaces. Curing will be faster if apply heat up to 200˚F. Set time is approx. 10-20 min. and full cure is 24 hours @ 75˚F.

(6) Cleanup: Use ketone solvent (such as methyl ethyl ketone or acetone) to clean up uncured adhesive.

For 50ml Cartridge:
Place cartridge into applicator and secure. Remove end cap by turning counter-clockwise. Dispense and discard small amount of adhesive to verify free flow in even ratio. Attach mixing nozzle. Clean surfaces to be joined (if possible, use acetone or isopropyl alcohol). Dispense and apply adhesive to clean surfaces, then join surfaces and secure in place until adhesive sets (15 min. @ 75˚F). Replace end cap after use.

For 250ml Cartridge:
Hold cartridge in upright position and unscrew plastic nut. Remove plug insert and make sure openings are clear. Attach mixing nozzle and secure with plastic nut. Place cartridge into applicator (works with standard caulking gun and rod-driven pneumatic caulking tools) and secure. Dispense and discard a small amount of adhesive to make sure both parts are mixing properly in nozzle. Clean surfaces to be joined (If possible, use acetone or isopropyl alcohol). Dispense and apply adhesive to clean surfaces, then join surfaces and secure in place until adhesive sets (about 15 min. @ 75˚F). Store with nozzle attached. Replace nozzle on next use.

* - based on 20g mixed sample

Safety Information

PRECAUTIONS: Avoid contact with eyes, skin or clothing. Wash thoroughly after handling. Provide adequate ventilation to control vapor. KEEP OUT OF REACH OF CHILDREN.

SUGGESTED FIRST AID: Eye Contact: Immediately flush eyes with plenty of water. If irritation persists, seek medical advice. Skin Contact: Wash skin with soap and water. Remove contaminated clothing. If symptoms occur, seek medical advice. Inhalation: Move to fresh air. If irritation persists, seek medical advice. Ingestion: Do not induce vomiting. Drink two glasses of water. Seek medical advice.

HANDLING SAFETY:
Part A (Resin) contains substances that are eye and skin irritants. Prolonged exposure may cause allergic skin reaction on sensitive skin and respiratory tract irritation.

Part B (Hardener) contains substances that are skin and respiratory irritants. Prolonged exposure may cause an allergic skin reaction on sensitive skin.

Shipping information

Shipping Weights

• E2ML50 (50ml cartridge with nozzle): 0.5 pounds
• E2ML50CASE (CASE of 10 - 50ml cartridge with nozzle): 2.5 pounds
• E2ML250 (250ml cartridge with nozzle): 1.5 pounds
• E2ML250CASE (CASE of 10 - 250ml cartridge with nozzle): 12.7 pounds
• E2QT1 (2 metal quart paint cans): 6.8 pounds
• E2GL1 (2 metal gallon paint cans): 22.4 pounds
• E2GL5 (2 metal 5 gallon buckets): 108 pounds

Shipping weight is the total weight of the product, including the box and packaging required to safely ship the item.

If you need more than a single order of our largest sizes, we suggest common carrier shipping.

Need drum size or larger? Contact us for pricing.

Notes