SmartAdhesives

G1 Industrial Grade White Glue

G1 Industrial Grade White Glue

  • Bonds paper, wood, natural fibers & woven nylons

  • Not your ordinary white glue

G1 Industrial Grade White Glue is a multi-purpose adhesive that makes a tough, flexible bond that can handle fluctuations in temperature and humidity. G1 sets quickly (approx. 4-6 min.) with strong wet tack and good machinability. G1 bonds natural fibers such as paper, wood, cotton cloth, hardboard (Masonite), leather, and coated paperboard. It also bonds plastic films such as cellophane, polyvinylidene chloride (Saran), cellulose acetate, polyvinyl chloride (PVC), and flexible vinyl. G1 dries clear and is non-toxic. FDA approved for indirect food contact.

This product is not returnable at the 5 gallon size.

Recommended Substrates

  • Fabric & Felt
  • Paper & Cardboard
  • Plastic: Flexible Vinyl

Industries & Uses

Technical Materials

Performance

  • Service temperature

    40 to 90 degrees F

    i

  • Impact resistant

    No

    i

  • Water resistant

    No

    i

  • Solvent resistant

    No

    i

Cured properties

  • Color when dry

    Milky white

    i

  • Dries transparent

    No

    i

  • Can be painted/stained

    Yes

    i

  • Fills gaps

    No

    i

  • Removable

    No

    i

  • Flexible

    Yes

    i

  • Rigid

    No

    i

Liquid properties

  • Form

    Thin Liquid

    i

  • Non-drip

    No

    i

  • Low/no VOCs

    Yes

    i

  • Viscosity @ 77°F (25°C)

    2,200 cP

    i

  • Worklife

    5 minutes

    i

  • Set time

    5 minutes

    i

  • Full cure time

    24 hours

    i

  • Shelf life

    12 months

    i

  • Cure method

    Evaporation

    i

  • Application temperature

    60 - 90 degrees F

    i

Handling

  • Number of components

    1

    i

  • Mix ratio

    No mixing required

    i

  • Application methods

    Brush, Machine, Roller, Sprayer

    i

Application instructions

DIRECTIONS:
(1) Prepare Surfaces: Clean surfaces to remove all dust, dirt, and other surface matter. G1 requires at least one porous surface so water can evaporate.

(2) Stir: Stir adhesive thoroughly before using.

(3) Apply: Best applied when temperature of adhesive and surfaces to be bonded are at least 60-90F. Spread a thin, even coat on dry surface. For wood, use thicker coat. Key is to get a uniform coat on surface to be joined. Can use brush, roller, or specialized equipment for large surfaces.

(4) Join: Join coated surfaces together and, if necessary, apply pressure or clamp to hold in place. Sets in approx. 4-6 min. @ room temperature. Full cure is 24 hours.

(5) Cleanup: Use damp cloth to wipe up adhesive while still wet. Use warm water for general cleanup. Close container when not in use.

KEEP FROM FREEZING.
Note: Always test on samples first to determine suitability.

Safety Information

SUGGESTED FIRST AID:

Eye Contact: Immediately flush eyes with plenty of water while gently holding eyelids apart. If irritation persists, seek medical advice.

Skin Contact: Wash with soap and warm water. If irritation develops, seek medical advice.

Inhalation: Move to fresh air. No special measures are required.

Ingestion: Do not induce vomiting. Drink two glasses of water. Seek medical advice.
Note: Always test on samples first to determine suitability.

Shipping information

Shipping Weights

  • G1QT (plastic f-style quart): 3.4 pounds
  • G1GL1 (plastic f-style gallon): 10.2 pounds
  • G1GL5 (plastic 5 gallon pail): 47.5 pounds


Shipping weight is the total weight of the product, including the box and packaging required to safely ship the item.

If you need more than a single order of our largest sizes, we suggest common carrier shipping.

Need drum size or larger? Contact us for pricing.

Notes

 

Find Your Adhesive

Connect this...
To this...

Optional Narrow your results:

No Results 0 adhesives

Please change your selections at the left