SmartAdhesives

G3 Packaging Adhesive

G3 Packaging Adhesive

  • Optimized for shipping & labeling applications

  • Tacky when wet, clear when dry

SmartAdhesives G3 Packaging Adhesive is formulated for labeling and carton packaging applications. G3 can be applied by brush, roller, or spray. G3 provides high wet tack properties for holding power in paperboard and corrugated box assembly as well as for film and paper labeling. The initial tackiness of G3 is good for packaging applications requiring holding power and a strong bond. G3 dries clear and cleans up with water when still wet. FDA approved for indirect food contact.

This product is not returnable at the 5 gallon size.

Recommended Substrates

  • Fabric & Felt
  • Foam: Flexible [latex, polyurethane]
  • Paper & Cardboard
  • Plastic: Flexible Vinyl

Industries & Uses

Technical Materials

Performance

  • Service temperature

    40 to 90 degrees F

    i

  • Impact resistant

    No

    i

  • Water resistant

    No

    i

  • Solvent resistant

    No

    i

Cured properties

  • Color when dry

    Clear

    i

  • Dries transparent

    No

    i

  • Can be painted/stained

    Yes

    i

  • Fills gaps

    No

    i

  • Removable

    No

    i

  • Flexible

    Yes

    i

  • Rigid

    No

    i

Liquid properties

  • Form

    Thin Liquid

    i

  • Non-drip

    No

    i

  • Low/no VOCs

    Yes

    i

  • Viscosity @ 77°F (25°C)

    1,600 cP

    i

  • Worklife

    10 minutes

    i

  • Set time

    10 minutes

    i

  • Full cure time

    24 hours

    i

  • Shelf life

    12 months

    i

  • Cure method

    Evaporation

    i

  • Application temperature

    60 - 90 degrees F

    i

Handling

  • Number of components

    1

    i

  • Mix ratio

    No mixing required

    i

  • Application methods

    Brush, Machine, Roller, Sprayer

    i

Application instructions

DIRECTIONS:
(1) Prepare Surfaces: Clean surfaces to remove all dust, dirt, grease, and other surface matter.

(2) Stir: Stir adhesive thoroughly before using.

(3) Apply: Best applied when temperature of adhesive and surfaces to be bonded are at least 60-90F. Apply a uniform coat on one dry surface to be bonded (preferably on a porous surface). Can use brush, roller, or specialized equipment for large surfaces.

(4) Join: Join surfaces together and apply slight pressure to bond. Sets in approx. 5-15 min. @ room temperature, depending on amount applied. Full cure is 24 hours.

(5) Cleanup: Use damp cloth to wipe up adhesive while still wet. Use warm water for general cleanup. Close container when not in use.
KEEP FROM FREEZING.

NOTE: Always test samples first to determine suitability.

Safety Information

SUGGESTED FIRST AID:
Eye Contact: Immediately flush eyes with plenty of water while gently holding eyelids apart. If irritation persists, seek medical advice. Skin Contact: Wash with soap and warm water. If irritation develops, seek medical advice. Inhalation: Move to fresh air. No special measures are required. Ingestion: Do not induce vomiting. Drink two glasses of water. Seek medical advice.

Shipping information

Shipping Weights

  • G3QT (plastic f-style quart): 3.4 pounds
  • G3GL1 (plastic f-style gallon): 10.2 pounds
  • G3GL5 (plastic 5 gallon pail): 46.8 pounds


Shipping weight is the total weight of the product, including the box and packaging required to safely ship the item.

If you need more than a single order of our largest sizes, we suggest common carrier shipping.

Need drum size or larger? Contact us for pricing.

Notes

 

Find Your Adhesive

Connect this...
To this...

Optional Narrow your results:

No Results 0 adhesives

Please change your selections at the left