Polyolefin Primer, for Polypropylene, Polyethlyene & EPDM Rubber (1 fl. oz.)

• Helps with difficult-to-bond plastics

• Essential for EPDM rubber

SmartAdhesives Polyolefin Primer is to be applied on difficult-to-bond plastics prior to bonding. This primer works particularly well when used in conjunction with our Instant Adhesives. For use with bonding polypropylene, polyethylene, polyacetal, and EPDM rubber. (1 fl. oz. bottle)

DANGER! POISON: CONTAINS METHANOL AND ACETONE. EXTREMELY FLAMMABLE LIQUID. HARMFUL OR FATAL IF SWALLOWED.

Material Safety Data Sheet (MSDS) as a PDF.

DIRECTIONS
(1) Clean and dry surfaces: Remove all oil, dirt, and grease.
(2) Apply to both surfaces: Brush on surfaces. Let dry (approx. 20-30 sec.) before applying adhesive.
(3) Storage: Store in cool, dry place away from sunlight

PRECAUTIONS
Extremely flammable liquid. Keep away from heat, sparks and open flame. Exposure to high heat may cause bursting. Avoid inhalation and contact with eyes, skin or clothing. Use only with adquate ventilation.

KEEP OUT OF REACH OF CHILDREN.

SUGGESTED FIRST AID
Eye Contact: Immediately flush eyes with plenty of water and seek medical attention.
Skin Contact: Wash skin with soap and water. If irritation persists, seek medical advice.
Inhalation: Move to fresh air. If irritation persists, seek medical advice.
Ingestion: Induce vomiting. Get immediate medical attention.